How to Setup TP-Link Wifi Extender
Consumer Electronics
THOA NGUYEN  

How to Setup TP-Link Wifi Extender?

Always waiting for a signal in the bedroom? Who can refuse to turn on their phone and swipe on Tiktok before going to bed? What should you do with a bad network, then? This time you need a TP-Link wifi extender. It can help expand the wifi network range so you can play your cell phone happily, even in your bedroom.

But how to setup TP-Link wifi extender? The installation method of the network extender always needs to be revised to operate.

Never mind, today, this article will help you install your extender easily.
Begin reading and find out what you will get!

3 Factors Affecting Wifi Signal

Before asking how to setup TP-Link wifi extender, everyone must be curious about why the wifi signal gets worse in the bedroom! Three main factors affect the signal.

The thickness of the blocking layer 

An average wall can weaken the signal by 10% or even 20%. There are two aspects to consider: the thickness of the wall and its material composition. 

Plywood, drywall, plain wood, and plain glass have little effect on radio waves and will not seriously degrade your signal. Heavier walls made of brick, concrete, metal, plaster, stone, or double glazing have a significantly stronger impact.

Non-porous materials offer far better protection against radio waves than porous ones. Steel constructions in many elevators and stairwells can interfere with radio waves.

Electromagnetic Interference 

Another major source of slowing down and disappearing networks is the presence of electromagnetic frequencies. Many of the devices we rely on in modern life use a relatively narrow range of the electromagnetic spectrum.

Current home and office wifi technologies compound the problem by using two different frequency bands for connectivity, and different electronic devices also use each band.

Older 2.4 GHz frequencies (such as microwave ovens and Bluetooth devices) penetrate obstacles better than newer 5 GHz bands (such as radar and digital satellite signals).

Physical Environment 

The location of the wifi antenna is also critical to network performance. For example, signals traveling down a narrow corridor are expected to use a semi-directional antenna rather than a multi-directional one.

For outdoor situations (e.g., installing wireless security cameras), be aware that precipitation (rain, snow, or fog) may affect range and speed. Trees and large crowds can weaken the signal.
You should place the access point, router, receiving antenna, etc., as high off the ground as possible. Signal strength is almost always highest at room height.

How to Setup TP-Link Wifi Extender?

Step 1. Before you can do anything with the Extender, you must gather information about your existing router. You must identify the router’s IP address, WiFi SSID (broadcast name), encryption type, and password to access the network.

Step 2. Plug the TP-Link Extender into an outlet.Step 3. Connect the TP-Link extender to your computer using an Ethernet cable. This will allow us to program the wireless settings into it so that it can connect.
Step 4. Join the wireless network broadcast by the Extender (the name should be something like “TP-Link_Extender_XXXXXX“).Step 5. Open a web browser and type “tplinkrepeater.net” in the address bar.

Step 6. When prompted to log in, the default username is “admin,” and the default password is “admin.” If that doesn’t work, try reverting the device to its factory settings or consulting the user manual to determine the default login details.

Step 7. Select “Quick Setup” and “Next.” Step 8. Select your region and click “Next.”
Step 9. You may have the TP-Link repeater look for available wireless networks.
This may take a minute or two, depending on how many networks you have around you.
Step 10. After setting up the Extender, you can move it to other locations to extend the range of your existing wireless network.
Step 11. Choose the name of your wireless network from the drop-down menu and click “Next.” Step 12. Enter the wireless password when prompted. Then select “Next.” 
Step 13. Check the network settings in the final window and select Finish if everything is correct.Step 14. If you want a larger wireless network, select Copy from the main router. If you want to create a different network, select Customize.

Step 15. Extender also has a web interface where you can alter the wireless network name and password, create a guest network, adjust the wireless channel, and more. When you’re done, put the Extender away and don’t touch it again.

Step 16. When done, you should test the Extender by moving away from the router and checking if the wireless signal is still strong.

how to reset netflix on smart tv
how to download spectrum app on smart tv
are vr headsets bad for your eyes

The Bottom Line

How to setup TP-Link wifi extender? This simple process can extend the range of your existing wireless network. Make sure to look at the instructions that came with the TP-Link extension you bought, as the steps may change slightly from model to model. By performing the following steps, you can ensure that a strong wireless signal is available throughout your home or office.

Leave A Comment